Posi Tap® Connector (0.75 sqmm)

Electrical Connector - Posi-Tap®

Posi-Tap® connectors allows you to tap into wires without cutting!

• Total wire integrity is maintained
• Installs in seconds by hand - No crimping or tools required
• Reusable or permanent
• Less resistance
• Vibration proof
• Fully insulated
• Powers up to 4 leads at once! 

POSI-TAP Connector meet or exceeds:

• SAEJ1211 Section 3.2.3
• Salt Spray Test Section 3.2.4 Immersion & Splash Test Section 3.2.5
• Dust, Sand & Gravel Test Section 3.2.7 Mechanical Vibration Section 3.2.8 Mechanical Shock Section 3.2.1 Temperature Test

Types Available in 

• Posi-Tap® Line Tap 0.75 sq.mm (18 ga)

1. Straight Mini Type 
2. Tapered

Posi-Tap Installation Instructions

Note: Regular Posi-Lock Products install the same way as the small cap of the Posi-Tap. Click here to see how to install a regular Posi-Lock.

Note: Larger Posi-Locks require 1/2" of stripped wire, and smaller ones require 3/8" of wire to be stripped. These photos show a Posi-Tap 1824, which requires 3/8" stripped on the tapping wire only. The tapped wire is not stripped.